Which Grandstream Wi-Fi Access Point Do I Need?

The right Grandstream Wi-Fi access point is the one that matches your building, client density, application load, cabling, PoE capability and expansion plan. A small office with ordinary laptops and phones has different needs from a hotel with roaming guests, a school with hundreds of concurrent devices, a warehouse needing long aisles covered, or an outdoor campus requiring weather-resistant long-range radios. Grandstream’s GWN portfolio now includes Wi-Fi 5, Wi-Fi 6, Wi-Fi 6E and Wi-Fi 7 choices, indoor and outdoor designs, wall-mount options and centralized management. This guide helps Tanzania buyers turn those choices into a practical shortlist.

Start With the Site, Not the Model Number

Wireless design begins with the environment. Record the approximate floor area, number of floors, wall construction, expected simultaneous users, important applications, guest traffic, existing Ethernet drops, switch port speeds and available PoE budget. Then identify where users actually gather. Meeting rooms, reception areas, classrooms, restaurant spaces and open offices often create higher density than corridors or storage rooms. Outdoor yards and courtyards introduce a different RF problem from indoor rooms. A good access-point choice therefore balances coverage with capacity rather than trying to cover an entire property from one radio.

Grandstream GWN Selection Guide

Management, Roaming, Security and PoE

Grandstream GWN access points can be managed through the embedded controller available in supported devices and through Grandstream’s centralized management platforms. This matters for businesses that want consistent SSIDs, guest access, configuration control and monitoring across multiple APs. Model-specific controller limits differ, so the deployment should be checked against the current datasheet. For larger estates, centralized cloud or on-premise management is generally easier than treating each AP as an independent device.

PoE planning is equally important. An access point may technically operate from a compatible PoE source while its best performance depends on the correct power class. High-end models may also expose multi-gigabit Ethernet interfaces, so pairing them only with older 1Gbps switching can create a wired bottleneck. Before purchasing, check switch port speed, PoE/PoE+ or PoE++ requirement, uplink capacity, VLAN design, DHCP, firewall rules and cable category. A wireless upgrade works best when the wired network behind it is designed for the same performance target.

Indoor or Outdoor?

Indoor access points are designed for rooms, corridors, offices, shops, classrooms, hotels and other protected spaces. Outdoor GWN LR/ELR products use ruggedized enclosures and longer-range designs for exposed areas. An outdoor AP is not automatically the correct choice simply because a customer wants more range: radio placement, obstacles, client transmit power and interference still matter. Likewise, published maximum range is not a promise of usable business performance through concrete walls. For reliable planning, treat vendor range figures as comparative guidance and perform a site assessment where coverage is business-critical.

Related FourTeck Resources

For regional networking procurement and broader infrastructure planning, buyers can review FourTeck technology solutions for cross-market requirements. Organizations coordinating East African projects can also use FourTeck Kenya and FourTeck Uganda when a project includes branches in those markets. For UAE-focused Grandstream procurement, Grandstream UAE solutions provide a specialist regional route. These resources are useful when one organization wants a consistent discussion around Wi-Fi, voice, switching and branch infrastructure across several locations.

Which Grandstream Wi-Fi Access Point Do I Need? Tanzania

For Tanzania, begin by separating coverage problems from capacity problems. A business may report weak Wi-Fi, yet the cause could be poor AP placement, thick walls, congested channels, insufficient backhaul, an overloaded router or too many users sharing one radio. FourTeck can use the number of users, floor plan, application mix and existing network information to build a more useful shortlist. Small professional offices may prioritize straightforward indoor Wi-Fi and manageable cost. Hotels, schools, hospitals and larger offices usually need multiple APs, roaming, segmented staff and guest networks, centralized management and carefully planned channels. Warehouses and industrial properties may need different mounting positions and directional thinking, while outdoor hospitality spaces, compounds and campuses should use appropriate outdoor-rated GWN products.

Tanzania buyers should also consider the complete wired path. If a Wi-Fi 6 or Wi-Fi 7 AP has a 2.5GbE or faster interface, the switch and cabling should be reviewed so the access layer does not become the bottleneck. Power reliability also matters: PoE switches, UPS protection and a sensible network cabinet can make wireless service easier to maintain than a collection of individual power adapters. Where business applications include voice, video meetings, cloud ERP, POS systems or surveillance viewing, capacity and latency expectations should be discussed before selecting the lowest-cost AP.

A practical quotation request for Tanzania should include site location, approximate area, floor count, wall type, user count, guest requirement, internet bandwidth, existing switch models, available PoE ports and whether outdoor coverage is required. This lets the selection process compare models on actual needs rather than marketing numbers. Wi-Fi 5 can still serve cost-sensitive environments, Wi-Fi 6 is a strong general business baseline for many upgrades, and Wi-Fi 7 is worth evaluating for new high-performance deployments with compatible infrastructure and a longer technology horizon.

Which Grandstream Wi-Fi Access Point Do I Need? Dar es Salaam

Dar es Salaam businesses range from compact offices and retail units to hotels, hospitals, schools, warehouses and multi-floor corporate premises. That variety makes model selection dependent on the physical site. A small office with twenty active devices does not need the same radio capacity as a conference venue where hundreds of phones appear within minutes. Start by mapping high-density areas such as meeting rooms, reception zones, training rooms and customer waiting spaces. Then identify concrete walls, lift cores, stairwells and other structures that can reduce signal propagation.

For a normal indoor business refresh, Wi-Fi 6 GWN models are sensible comparison points because OFDMA and modern multi-user features can improve efficiency when many compatible clients share airtime. Higher-capacity 4×4 models deserve attention in busy zones, while entry or mid-tier APs may be sufficient in smaller rooms. Wi-Fi 7 should be considered when the organization is building a new network, expects a long replacement cycle, uses high-throughput local applications or wants to prepare for a growing fleet of newer client devices. The purchase should include compatible PoE switching and appropriate uplink capacity.

For coastal outdoor areas, courtyards, loading yards or external hospitality spaces, compare Grandstream outdoor LR/ELR models rather than exposing an indoor AP to weather. Ask for a quotation with a floor plan, user estimate, ISP bandwidth and existing switch details. A design conversation can then determine whether the requirement is one AP, several coordinated APs, wall-mount units for rooms, or an indoor/outdoor combination. This avoids buying one very powerful AP when several correctly positioned units would produce a more consistent user experience.

Which Grandstream Wi-Fi Access Point Do I Need? Mwanza

In Mwanza, Grandstream Wi-Fi planning can serve offices, education sites, hospitality properties, retail operations, clinics and warehouses with very different RF conditions. The first decision is not Wi-Fi 6 versus Wi-Fi 7; it is understanding where connectivity is required and how many active clients will share each zone. A property with spread-out rooms may need more AP locations even when the total user count is modest, while an open training hall may need capacity concentrated in one area. Wall materials, ceiling height and cable routes should therefore be included in the buying conversation.

For cost-sensitive deployments with ordinary browsing and cloud applications, an established GWN model may meet the requirement without buying the highest tier. For a new business network, Wi-Fi 6 is often a practical technology class to compare because it supports efficient multi-user operation and modern client fleets. Where a site expects high device density, look beyond the generation label and compare spatial streams, concurrent-client guidance, Ethernet uplinks and PoE needs. High-end Wi-Fi 7 can be valuable for future-focused sites, but it should be paired with suitable switching and clients to justify the additional capability.

Outdoor yards, compounds and hospitality spaces should be treated separately from indoor rooms. Grandstream’s outdoor access points are intended for exposed installations and long-range applications, but final placement should still account for line of sight and client capability. Mwanza buyers can prepare a better quotation by sharing building drawings, expected user numbers, desired staff and guest SSIDs, switch details, internet bandwidth and any voice or video requirements. That information allows an AP shortlist to be based on measurable requirements rather than a single range figure.

Which Grandstream Wi-Fi Access Point Do I Need? Arusha

Arusha has a strong mix of hospitality, tourism, education, professional services and operational sites where guest experience and dependable staff connectivity can be equally important. Hotels and lodges may need coverage across reception, rooms, restaurants, meeting areas and outdoor spaces, while an office may concentrate users in a smaller footprint. For hospitality, do not assume one ceiling AP can serve many rooms through dense walls. Room layout, corridor placement, wall construction and roaming expectations should influence the number and type of access points.

Grandstream provides ceiling-style indoor units, wall-mount options and outdoor products, allowing the physical design to follow the building. Wi-Fi 6 models can provide a strong balance for contemporary business and guest networks, while Wi-Fi 7 models are candidates for premium new builds and sites that expect a long technology lifecycle. If many guests stream video or join conferences simultaneously, radio capacity and internet bandwidth both matter. Upgrading APs cannot compensate for an undersized internet circuit, congested gateway or slow switch uplink.

For an Arusha quotation, specify room count, floors, common areas, outdoor zones, maximum occupancy, staff device estimate, guest portal needs and whether existing Ethernet reaches proposed AP positions. Where a site uses IP phones, cameras, POS terminals and office PCs on the same infrastructure, VLAN and PoE planning should be considered as part of the project. A structured approach helps choose between lower-cost GWN units for lighter zones and higher-capacity units for conference, lobby or shared spaces, while keeping centralized management consistent.

Which Grandstream Wi-Fi Access Point Do I Need? Dodoma

Dodoma organizations selecting Grandstream Wi-Fi should focus on reliable coverage, manageable expansion and a network architecture that can support additional users over time. Government-related offices, education facilities, professional firms, healthcare sites and growing commercial operations may have multiple departments, meeting rooms and public-facing areas. Rather than selecting an AP solely by maximum client count, estimate realistic simultaneous usage per zone and identify applications that are sensitive to latency, including voice and video.

A Wi-Fi 6 design is a practical starting point for many new office deployments, with models differentiated by radio configuration, throughput, Ethernet interfaces and supported client density. Higher-capacity GWN766x units can be compared for dense areas, while simpler units can cover lower-demand spaces. Wi-Fi 7 GWN767x products can be evaluated for new infrastructure where compatible devices and multi-gigabit switching are part of the plan. Existing Cat cabling, PoE switch budget and upstream firewall capacity should be checked before the AP order is finalized.

For campuses or external areas, use outdoor-rated products where required and plan coverage around actual user locations. A quotation request should include a basic site drawing, approximate distances, construction materials, expected devices, SSIDs, guest access needs and the preferred management approach. Central management becomes increasingly useful as the number of APs grows because configuration consistency, monitoring and troubleshooting matter more than individual device setup. The objective is a wireless network that can be operated predictably, not simply a collection of radios with strong specifications.

Which Grandstream Wi-Fi Access Point Do I Need? UAE

UAE deployments often combine high device density, modern fibre connections and demanding hospitality, retail, education and corporate environments. In such projects, access-point selection should account for multi-gigabit switching and newer client devices as well as coverage. Grandstream’s Wi-Fi 6, 6E and Wi-Fi 7 ranges provide several performance tiers. A general office may be well served by a Wi-Fi 6 model, while a conference-heavy venue, premium hotel or new enterprise fit-out may justify comparing higher-stream Wi-Fi 6 or Wi-Fi 7 options.

The 6GHz band available to Wi-Fi 6E and tri-band Wi-Fi 7 equipment can provide additional spectrum where supported, but the design should confirm local regulatory requirements and actual client compatibility. There is little value in selecting a feature that the installed client fleet cannot use. Conversely, new construction with a five-year or longer refresh plan may reasonably prioritize newer radios, multi-gigabit uplinks and adequate PoE so the wired infrastructure does not constrain future wireless capability.

Outdoor UAE deployments need special attention to product environmental ratings, mounting, heat exposure and site conditions. Use outdoor-rated Grandstream products for external coverage and confirm installation requirements from current documentation. Organizations coordinating Tanzania and UAE branches can standardize SSID naming, segmentation principles and management practices while still selecting AP models according to each site. Share floor plans, user counts, application requirements and switching details when requesting a quote so the proposed bill of materials reflects the deployment rather than a generic package.

Which Grandstream Wi-Fi Access Point Do I Need? Uganda

Uganda buyers can approach Grandstream Wi-Fi selection by first defining whether the project is a single office, multi-floor building, hospitality property, school, warehouse or campus. Each layout changes the balance between coverage and capacity. Wi-Fi 6 is a useful baseline to compare for modern business networks, but a smaller site may not require a high-stream model. Conversely, a busy school or event space can overload an entry radio even if signal strength appears excellent.

Check concurrent clients, spatial streams, Ethernet uplink speed and PoE requirements alongside the Wi-Fi generation. Grandstream’s management options are useful for multi-AP networks because administrators can maintain consistent configuration and visibility. Where guest access is needed, plan separate policies and VLANs rather than mixing visitor devices with internal business resources. For sites using cloud applications or IP voice, upstream internet and firewall performance should also be reviewed.

Outdoor compounds and yards should use suitable outdoor LR/ELR access points. A project spanning Kampala and regional branches can standardize on a small set of models, but branch size should still determine quantity and tier. Provide floor plans, user estimates, ISP speed, switch model, PoE availability and expected outdoor zones before requesting a final quotation. This information helps avoid both under-sizing and unnecessary overspending.

Which Grandstream Wi-Fi Access Point Do I Need? Kampala

Kampala offices, hotels, clinics, schools and retail properties frequently need wireless networks that cope with concentrated user groups and complex building materials. Begin with a room-by-room requirement rather than a city-wide model recommendation. Concrete walls and floor slabs can reduce usable signal, so several moderate APs positioned correctly may outperform one high-end unit installed in a poor location. Meeting rooms and public areas should be sized for peak occupancy rather than average daily use.

For new installations, compare Wi-Fi 6 models across radio capacity and wired interfaces. GWN7662-class and GWN7664-class devices are relevant when density and throughput are higher, while lower tiers can serve lighter zones. Wi-Fi 7 becomes more compelling when a new network includes multi-gigabit switching, suitable PoE and modern client devices. Avoid choosing by wireless headline speed alone: actual user experience depends on spectrum, client capability, interference and the upstream network.

A Kampala procurement brief should identify floor count, square area, wall type, users, SSIDs, guest access, voice/video applications, existing cabling and switch models. For outdoor restaurant seating, parking or campus spaces, include outdoor-rated APs in the design. Centralized management can simplify operations when several APs are deployed across floors or branches, making configuration and troubleshooting more consistent.

Which Grandstream Wi-Fi Access Point Do I Need? Arua

Arua organizations may need Wi-Fi for offices, education, healthcare, hospitality, logistics and distributed operational sites. Where internet connectivity is a constrained resource, the wireless network should still be designed properly: a strong AP cannot increase ISP bandwidth, but correct placement and client distribution can prevent the local WLAN from becoming an additional bottleneck. Start with the number of active devices, floor plan and critical applications.

Wi-Fi 6 models are worth comparing for modern business deployments because efficient multi-user operation can help when many compatible devices are active. A smaller office may use a lower-tier indoor AP, while a school or busy service facility may need several APs and higher radio capacity. Outdoor areas should use weather-suitable LR/ELR products rather than indoor hardware. If the site expects expansion, choose switching and PoE with enough spare capacity for additional APs.

For procurement, share the existing router/firewall, switch type, cable routes, user count and any guest or staff separation requirements. Where remote administration is valuable, review Grandstream’s centralized management choices. A consistent design across multiple sites can reduce support complexity, but AP quantity and performance tier should remain site-specific. The goal is stable service in the areas where people actually work, learn or interact with customers.

Which Grandstream Wi-Fi Access Point Do I Need? Mbarara

Mbarara businesses choosing a Grandstream GWN access point should distinguish a coverage upgrade from a complete network refresh. If an existing AP leaves dead zones, placement and building construction may be the main issue. If signal is strong but performance falls during busy periods, capacity, interference, backhaul or internet bandwidth may be the constraint. These two problems can lead to different model and quantity decisions.

For ordinary office use, Wi-Fi 6 provides a modern basis for comparison. For denser facilities, compare 4×4 radio options, client guidance and multi-gigabit ports. Wi-Fi 7 is most relevant when the project is designed around newer client capabilities and adequate wired infrastructure. Outdoor business spaces, yards or compounds should use outdoor-rated Grandstream products and suitable mounting. Published range should not replace a practical assessment of obstacles and user locations.

Prepare a quotation request with floor area, number of users, busiest zones, applications, internet bandwidth, switch and PoE details, and expected growth. If IP phones, cameras and PCs share the same switch infrastructure, include those loads in the PoE and VLAN plan. This broader view helps the wireless purchase fit into the network instead of becoming an isolated upgrade.

Which Grandstream Wi-Fi Access Point Do I Need? Gulu

Gulu deployments can range from compact professional offices to campuses, accommodation properties and public-facing facilities. A suitable AP choice begins with expected simultaneous devices and building geometry. Long corridors, separate blocks and thick walls usually require multiple planned radio locations. Open halls create a different challenge: signal may travel easily, but many simultaneous clients can consume airtime and require greater capacity.

Grandstream’s GWN range lets buyers choose technology and capacity tiers. Wi-Fi 5 remains available for some budget-led requirements, Wi-Fi 6 is a practical contemporary option for many business networks, and Wi-Fi 7 can suit forward-looking deployments. Compare MIMO configuration, wired uplink and PoE alongside generation. Where outdoor coverage is needed, use an LR/ELR outdoor model rather than trying to push indoor signal through exterior walls.

For a useful Gulu quote, provide site drawings if available, active user estimates, SSID requirements, existing switches and expected applications. If the site may expand to additional buildings, discuss management and network architecture from the start. Centralized configuration and consistent segmentation can make future additions easier than redesigning each AP independently.

Which Grandstream Wi-Fi Access Point Do I Need? Kenya

Kenya organizations selecting Grandstream wireless equipment should plan around office density, hospitality requirements, campus scale, warehousing and branch standardization. A Nairobi head office may prioritize high-density meeting areas and multi-gigabit switching, while a smaller branch may need a simpler Wi-Fi 6 unit. Hotels and schools often benefit from multiple coordinated APs because room boundaries and peak occupancy create challenges that a single high-power device cannot solve.

Use Wi-Fi generation as one selection dimension rather than the only one. A high-stream Wi-Fi 6 AP may be a better fit for some dense environments than an entry Wi-Fi 7 model, depending on clients and traffic. Grandstream’s own guidance emphasizes MIMO, generation and indoor/outdoor range as core comparison factors. For Wi-Fi 7, also check switching, PoE and client readiness. For outdoor courtyards, campuses and yards, choose products engineered for outdoor operation.

Multi-branch organizations can standardize management while using different AP tiers by site. Share expected user count, floor plan, internet bandwidth, switch inventory, PoE budget and growth plan when requesting a quotation. Buyers can also review FourTeck Kenya for regional product and procurement context. A planned bill of materials should include APs, mounting, PoE switching where needed, cabling, UPS protection and any network configuration work required for staff, guest and operational VLANs.

Which Grandstream Wi-Fi Access Point Do I Need? Kuwait

Kuwait businesses evaluating Grandstream access points should match the WLAN to modern broadband speeds, building layout and device density. Corporate offices, clinics, retail, hospitality and education sites can have very different peak usage. Start with the number of active devices per area and the type of traffic. Video meetings, cloud applications and high-resolution media demand more consistent capacity than basic messaging and browsing.

Wi-Fi 6 models provide a strong business comparison point, with higher MIMO configurations for denser spaces. Wi-Fi 7 can be considered for new fit-outs and long refresh cycles where compatible devices, multi-gigabit switching and suitable PoE are included. If 6GHz operation is part of the design, confirm local regulatory requirements and client support. Outdoor installations should use models rated for outdoor conditions and should follow vendor environmental and mounting guidance.

A procurement request should identify users, floor area, cabling, switch ports, PoE capability, ISP bandwidth, guest requirements and any voice/video priority needs. Centralized management is valuable for multiple APs and branches. Rather than purchasing identical high-end devices everywhere, use higher-capacity units where density demands them and appropriate lower tiers in lighter zones, while keeping the overall management approach consistent.

Which Grandstream Wi-Fi Access Point Do I Need? Ghana

Ghana buyers can choose Grandstream Wi-Fi more effectively by documenting the site before comparing models. Offices, schools, hotels, clinics, warehouses and retail sites have different user patterns and wall layouts. The access point with the highest theoretical speed is not automatically the most cost-effective choice. Determine where users gather, how many devices are active simultaneously and whether staff and guests need separate networks.

For new business installations, Wi-Fi 6 is a useful baseline; denser sites should compare higher radio capacity and appropriate wired uplinks. Wi-Fi 7 can be attractive for future-ready builds, especially where the switch layer is already multi-gigabit and client refreshes are expected. Outdoor compounds should use outdoor-rated Grandstream products. Where power quality is a concern, include UPS protection for the network core and PoE switches so wireless service can remain coordinated with the rest of the infrastructure.

For a Ghana quotation, provide floor area, user count, internet speed, existing switching, outdoor zones and application priorities. If several branches are involved, discuss centralized management and a repeatable configuration standard. This helps keep SSIDs, VLANs and policies consistent while still allowing each site to use the AP capacity tier that matches its local demand.

Which Grandstream Wi-Fi Access Point Do I Need? Nigeria

Nigeria’s business environments can require wireless networks ranging from a few users in a branch office to dense corporate, education, hospitality and commercial deployments. Begin with peak concurrent devices rather than employee count alone because each person may connect a laptop and phone, while visitors and IoT equipment add more clients. Then map high-use areas and identify whether the existing wired network can support the proposed APs.

Wi-Fi 6 GWN models can serve many contemporary business requirements, while higher-capacity 4×4 options should be considered for dense areas. Wi-Fi 7 models are relevant to premium new deployments and longer-term infrastructure planning, but their benefits depend on compatible clients, adequate PoE and fast wired uplinks. Outdoor yards, campuses and hospitality spaces should use outdoor-rated LR/ELR equipment. Do not rely on a maximum range figure to predict performance through walls or across a busy RF environment.

Power continuity can be an important part of the network design. If APs are powered centrally from PoE switches protected by a suitable UPS, the wireless layer can be easier to maintain than scattered local power supplies. A quotation request should include switch models, PoE budget, user estimates, building drawings, internet capacity and segmentation requirements. For multi-site organizations, centralized GWN management can support a more consistent operational model.

Which Grandstream Wi-Fi Access Point Do I Need? Seychelles

Seychelles hospitality, office and service environments can combine indoor guest spaces with terraces, courtyards and other outdoor areas, making indoor/outdoor AP selection especially important. A hotel or resort should map rooms, corridors, reception, restaurants, meeting spaces and external guest zones separately. Walls, room density and roaming expectations often mean multiple access points are preferable to attempting very long indoor coverage from a single device.

Wi-Fi 6 is a practical technology class for many guest and business networks, while Wi-Fi 7 can be considered for new premium infrastructure where newer clients and multi-gigabit backhaul are part of the design. Outdoor Grandstream LR/ELR products are the appropriate family to evaluate for exposed coverage. Environmental conditions, mounting, cable protection and vendor installation guidance should be considered before deployment.

Guest networks should be segmented from operational systems such as POS, administration and management devices. Capacity planning should consider peak occupancy rather than average occupancy, especially in common areas. When requesting a quotation, share room count, property layout, maximum guests, staff devices, internet bandwidth, existing switch details and outdoor zones. This gives the supplier enough information to propose a realistic AP mix instead of a generic model recommendation.

How to Decide Between Wi-Fi 5, Wi-Fi 6, Wi-Fi 6E and Wi-Fi 7

Choose Wi-Fi 5 primarily when acquisition cost and compatibility with an established client fleet are more important than investing in the newest wireless features. Choose Wi-Fi 6 for a broad range of current business deployments where improved multi-user efficiency and a modern technology baseline are valuable. Consider Wi-Fi 6E when 6GHz support is useful and both regulatory conditions and clients support it. Consider Wi-Fi 7 for new, performance-focused deployments that can use features such as MLO and that have the switching, PoE and client roadmap to benefit. The best answer can differ by zone: a site can use a higher-capacity AP in a conference area and a lower tier in low-density spaces while maintaining a consistent management platform.

Quotation Checklist

Frequently Asked Questions

Decision Recap

For a small, cost-sensitive indoor site, start with lower-tier GWN indoor models and verify whether Wi-Fi 5 or Wi-Fi 6 best fits the refresh plan. For a typical new business network, compare Wi-Fi 6 GWN766x options. For dense areas, prioritize MIMO, client capacity and wired uplink rather than only generation. For future-focused high-performance deployments, compare GWN767x Wi-Fi 7 models and ensure the switching and PoE layer can support them. For outdoor spaces, choose the appropriate outdoor LR/ELR family. In every case, determine AP quantity from the building and users, not from headline range alone.

Talk Through Your Grandstream Wi-Fi Design

Send FourTeck Tanzania your site type, floor plan or dimensions, expected devices, internet speed, existing switch information and indoor/outdoor coverage requirement. A useful recommendation can then compare the appropriate GWN technology tier, AP quantity, PoE needs, management approach and supporting network components. This reduces the risk of buying too few APs, placing them poorly or investing in wireless capability that the wired network cannot use.