Verified FS-108F-FPOE Product Overview

Fortinet positions the FS-108F family for retail and branch-style secure access deployments. The FS-108F-FPOE variant combines eight 10/100/1000 Ethernet access interfaces with two GE SFP interfaces and provides IEEE 802.3af/at PoE on all eight copper ports. Its maximum PoE power budget is 130 W. Fortinet publishes 20 Gbps duplex switching capacity, 30 Mpps packet forwarding, 8K MAC address storage, support for up to 4K VLANs and 4 microsecond network latency for this model. The enclosure can be used as a desktop unit or with a 19-inch rack bracket, and its fanless design is useful where acoustic simplicity matters.

For procurement, the practical question is not only whether eight ports are enough. Buyers should map every endpoint, its PoE class and expected power draw, the uplink medium, VLAN plan, management approach, rack or desk location and growth allowance. A 130 W budget is shared across powered devices, so eight attached endpoints do not automatically mean every endpoint can draw its maximum PoE+ allowance simultaneously. FourTeck can help turn an endpoint list into a cleaner bill of materials before quotation.

Technical Specifications and Buyer Notes

Where the FS-108F-FPOE Fits

This model is most compelling when a site has a small but important cluster of powered network endpoints. A branch may need two or three wireless access points, several IP phones and a camera; a boutique hotel area may need access points and phones; a clinic may need segmented administrative, staff and device connectivity; a retail location may need point-of-sale terminals, Wi-Fi and surveillance connectivity. The eight-port format keeps the access layer compact, while managed switching allows the network to be designed around VLANs and controlled uplinks rather than relying on a basic unmanaged switch.

In a Fortinet environment, buyers can also evaluate the switch as part of a wider security architecture rather than as an isolated LAN component. Management design, FortiGate integration, firmware compatibility and transceiver selection should be checked against the actual deployment. Current Fortinet documentation lists FS-108F-FPOE among supported FortiSwitchOS 7.6.6 models, but production firmware decisions should still follow the compatibility and change-control policy of the specific network.

FortiSwitch FS-108F-FPOE Tanzania

Tanzanian organizations evaluating the FortiSwitch FS-108F-FPOE typically need a compact access switch that can serve a defined office, branch, counter, security zone or wireless edge without moving immediately to a 24-port platform. The model is particularly relevant where PoE is central to the design. Instead of installing separate power adapters beside compatible access points, phones or cameras, the network team can deliver Ethernet connectivity and power from the switch, subject to the endpoint standard and the shared 130 W budget. That can simplify cable planning and reduce the number of power points required at endpoint locations.

For a Tanzania quotation, start with a device schedule. List every planned endpoint, identify which devices require PoE, record their expected wattage and note whether any ports must remain free for growth. Then identify the upstream device, cable type and distance. The two GE SFP interfaces provide fiber uplink options, but the required optics must be selected for the actual fiber type, distance and upstream equipment. Buyers should avoid ordering a transceiver only because it physically fits an SFP slot; compatibility and optical specifications need to match the complete link.

The environmental plan also matters. Fortinet specifies an operating range of 0°C to 45°C for this model. A fanless switch reduces moving parts and acoustic output, but it still needs suitable airflow and should not be placed in an overheated, sealed or poorly ventilated cabinet. Power protection should be considered alongside the switch, especially where PoE endpoints depend on it. A UPS strategy can help keep the access layer and powered devices available during short power interruptions, provided the UPS is correctly sized for the combined load.

FourTeck Tanzania can use these details to help structure the inquiry around the switch, optics, patching, rack placement and related Fortinet components. Buyers can also review FourTeck Tanzania IT solutions when the requirement extends beyond one switch to firewall, wireless, cabling or infrastructure planning.

FortiSwitch FS-108F-FPOE Dar es Salaam

For Dar es Salaam businesses, the FS-108F-FPOE can suit branch offices, professional practices, retail sites, hospitality spaces and focused network zones where eight powered Gigabit ports are enough for the immediate edge requirement. Dense commercial environments often combine wired users, Wi-Fi, voice and surveillance devices in a relatively small area. A full-PoE eight-port switch allows a designer to allocate every copper port to a powered endpoint if needed, while the shared 130 W budget remains the governing power limit.

A sensible Dar es Salaam deployment begins with physical topology. If the switch is installed in a communications cabinet, identify the cable routes to desks, ceilings, cameras and access points before deciding that eight ports are sufficient. Reserve capacity for maintenance or expansion where possible. If the switch connects back to a core network over fiber, confirm whether single-mode or multimode fiber is installed, the distance, connector type and compatible SFP optics. Where copper uplink is preferred, remember that the model’s eight RJ45 interfaces are also the access interfaces, so port allocation should be documented clearly.

PoE planning is especially important for wireless and surveillance projects. Endpoint data sheets should be checked for maximum power requirements rather than relying on typical consumption alone. This gives the project team a more conservative basis for deciding whether the 130 W budget is adequate. If future expansion is likely to add many cameras or high-power access points, a higher-density FortiSwitch may be a better long-term fit than filling this compact model immediately.

Procurement teams should request a quote with the exact model FS-108F-FPOE, required quantity, intended management environment, SFP needs, endpoint list and desired support context. This reduces ambiguity between the non-PoE, partial-PoE and full-PoE variants in the 108F family and helps ensure that the delivered design matches the intended branch network.

FortiSwitch FS-108F-FPOE Mwanza

In Mwanza, organizations planning compact branch networks can consider the FS-108F-FPOE where the access layer must power several endpoints while remaining easy to place in a small cabinet or office IT area. The switch can be useful for a branch with IP telephony, ceiling Wi-Fi, a limited camera deployment and a few wired devices, provided the final port and power calculations fit within eight Gigabit access ports and the 130 W PoE budget.

The buying process should distinguish network port capacity from PoE power capacity. Eight PoE+ ports provide connection flexibility, but the shared budget means endpoint wattage must be totaled. A project with eight low-power phones has a different demand profile from a project with several high-performance wireless access points or cameras. Recording device model, quantity and maximum PoE requirement before purchase helps avoid an installation where the physical port count is adequate but the power design is not.

Mwanza deployments may also involve an uplink to another floor, building or network room. The two SFP slots can support fiber-based topology when compatible optics are selected. Fiber planning should include link distance, fiber medium, connector arrangement, upstream interface and redundancy expectations. The FS-108F-FPOE does not replace careful topology design; it provides compact access switching that should be fitted into a documented network architecture.

For organizations already standardizing on Fortinet security, the switch can be evaluated alongside the firewall and wireless layers so VLANs, endpoint groups and operational management are planned consistently. A quotation request should therefore mention the existing or proposed FortiGate model, network segmentation goals and whether FortiLink-managed operation is part of the design. This information gives the supplier and integrator a clearer basis for checking the complete solution rather than quoting an isolated switch.

FortiSwitch FS-108F-FPOE Arusha

Arusha buyers may encounter the FS-108F-FPOE in hospitality, tourism, office, education and branch-network projects where quiet operation and compact PoE access are useful. A fanless switch can be attractive in locations where network equipment sits close to staff or guest areas, although installation still needs adequate ventilation. The desktop or rack-bracket form factor gives installers flexibility when the site does not justify a large switching cabinet.

Hospitality and guest-facing environments should plan segmentation carefully. Staff systems, guest Wi-Fi infrastructure, voice devices, cameras and operational equipment may have different access requirements. A managed FortiSwitch can participate in a VLAN-based design, but the security outcome depends on correct configuration across switching, firewalling and wireless components. The switch should be treated as one part of that architecture rather than as a standalone security appliance.

PoE makes endpoint placement easier, but cable quality and length still matter. Structured cabling should be tested, labeled and documented so faults can be isolated quickly. Where access points are mounted on ceilings or cameras are positioned away from convenient power sockets, PoE can simplify installation. The 130 W total budget should be checked against maximum endpoint demand with allowance for realistic future changes. If the planned environment will quickly exceed eight ports, selecting a larger access model from the outset can reduce the need for an early redesign.

When requesting the FS-108F-FPOE for an Arusha project, include floor or zone information, endpoint quantities, PoE requirements, fiber uplink details and any Fortinet devices already in service. This allows the quotation discussion to cover optics, patching and compatible network components instead of focusing only on the switch chassis.

FortiSwitch FS-108F-FPOE Dodoma

Dodoma organizations looking for controlled wired access in a small branch or departmental network can use the FS-108F-FPOE as a compact building block. Its eight Gigabit PoE+ interfaces can connect and power compatible edge devices, while two SFP interfaces provide uplink choices. Typical procurement scenarios include administrative offices, meeting spaces, training rooms, clinics, service counters and distributed sites that need a manageable access layer rather than a basic unmanaged switch.

Network designers should start with segmentation and device roles. A port assigned to an IP phone may need a different VLAN policy from a port serving a camera or access point. Where a FortiGate is used upstream, the project can evaluate Fortinet’s integrated management approach and determine the appropriate configuration for the supported software release. Firmware selection should follow documented compatibility and change-control practices rather than automatically installing the newest release on production equipment.

Power resilience deserves attention because a PoE switch becomes the power source for several network services. If wireless, voice or cameras depend on the FS-108F-FPOE, an outage affecting the switch can affect all of those endpoints simultaneously. UPS sizing should consider switch consumption plus the PoE load and desired runtime. The equipment room should also remain within the published operating environment, with ventilation that prevents heat buildup around the fanless chassis.

A well-prepared Dodoma quote request should state the number of switches, endpoint types, expected PoE load, uplink medium, rack requirements and existing Fortinet environment. It should also distinguish required hardware from optional support or deployment services. That procurement discipline helps buyers compare offers on a like-for-like basis and reduces the risk of missing optics, patch leads or installation components.

FortiSwitch FS-108F-FPOE UAE

For UAE projects, the FS-108F-FPOE is relevant to compact Fortinet branch, retail, hospitality and office networks that need full PoE availability across eight Gigabit copper interfaces. The model can be considered for small communications rooms, satellite offices and focused device zones where deploying a larger 24-port switch would leave substantial unused capacity. The two GE SFP interfaces also support fiber-oriented uplink designs when compatible optics are selected.

Procurement teams should compare the model against the actual PoE worksheet rather than assuming that eight PoE+ ports guarantee enough power for any eight devices. The 130 W shared budget must cover the powered endpoints. Wireless access points, cameras and other PoE devices can have materially different maximum draw, so the endpoint data sheets should drive the calculation. Projects with future device growth should preserve both spare ports and spare PoE headroom.

Environmental design is also important in the UAE. The published operating temperature ceiling is 45°C, which makes correct indoor cabinet conditions and ventilation essential. Network equipment should not be treated as suitable for uncontrolled hot spaces merely because it is fanless. Where a branch relies on the switch for voice, Wi-Fi and cameras, protected power and appropriate UPS planning can reduce disruption during short electrical events.

Regional buyers can also review FourTeck Fortinet UAE resources for broader Fortinet-focused planning. A useful inquiry should include model, quantity, delivery destination, required optics, management environment and endpoint schedule so the proposed configuration can be reviewed before purchase.

FortiSwitch FS-108F-FPOE Uganda

Ugandan businesses can consider the FS-108F-FPOE for small branches and edge networks where PoE devices need to be consolidated onto a managed Fortinet access switch. The eight Gigabit PoE+ ports are useful for a controlled mix of phones, access points, cameras and wired network devices, while the 130 W total PoE budget provides a clear design boundary. Two GE SFP interfaces support uplink planning where fiber is appropriate.

A good Uganda deployment plan should account for the whole branch stack. Identify the firewall or router upstream, the number of wired users, wireless coverage requirement, voice endpoints, surveillance devices and any future expansion. This allows the switch to be sized in context. If a branch expects to exceed eight access connections shortly, a larger FortiSwitch may be more efficient than adding another small switch later. Conversely, a low-port site can benefit from the compact footprint without paying for a large number of unused access interfaces.

PoE and power continuity should be planned together. If multiple services draw power from the switch, UPS runtime calculations should include the powered endpoints as well as the switch itself. Structured cabling should be tested and labeled, particularly for ceiling and camera runs that can be difficult to troubleshoot after a site becomes operational. Fiber uplinks require compatible SFPs selected for the actual optical link.

For broader regional information, buyers can consult FourTeck Uganda. For a precise quotation, provide the FS-108F-FPOE model, quantity, city, endpoint list, PoE requirements and desired Fortinet management design.

FortiSwitch FS-108F-FPOE Kampala

Kampala offices, retailers, clinics and hospitality locations may use the FS-108F-FPOE when a compact managed access switch needs to power a limited number of edge devices. The model’s all-port PoE+ capability makes port assignment flexible: any of the eight Gigabit RJ45 interfaces can serve a compatible powered endpoint. However, the aggregate 130 W limit means design should be based on the total endpoint power profile rather than the number of ports alone.

In a multi-service branch, network segmentation can separate staff systems, guest connectivity, voice and surveillance traffic. The FS-108F-FPOE supports managed switching features that can participate in such a design, while an upstream firewall enforces the relevant security policy. Organizations using FortiGate should document how the switch will be managed and ensure the intended FortiSwitchOS and FortiGate environment are compatible before rollout.

The two SFP interfaces are valuable when a Kampala site has fiber between network rooms or needs an optical uplink to upstream infrastructure. Optics are not a generic accessory: wavelength, fiber type, reach and upstream compatibility need to be matched. The same discipline applies to copper cabling, especially when PoE is delivered over longer structured-cabling runs. Testing and labeling improve maintainability and make later moves or troubleshooting less disruptive.

Buyers preparing a Kampala RFQ should include port allocation, PoE endpoint models, uplink type, rack or desktop preference and support expectations. A clear technical request helps separate the FS-108F-FPOE from similarly named 108F variants and gives the project team a stronger basis for checking whether the model is genuinely the right fit.

FortiSwitch FS-108F-FPOE Arua

Arua branch and project networks can benefit from compact switching when the endpoint count is modest but network management and PoE remain important. The FS-108F-FPOE combines eight Gigabit powered access interfaces with two SFP interfaces, making it suitable for a small access layer where wireless, voice, surveillance or other compatible PoE endpoints share the same managed switch.

For distributed organizations, standardization can be as important as raw port count. Using a consistent switch family across small sites can simplify configuration templates, spares planning and administrator familiarity, provided every site fits the same technical assumptions. An Arua location with only a few powered endpoints may fit the 108F-FPOE well, while a larger office should be assessed separately instead of forcing a standard model into an undersized role.

Connectivity planning should include the WAN edge and LAN uplink. If fiber is used from the switch to another network device, specify the existing fiber type and link distance so compatible SFPs can be selected. If the switch powers critical access points or phones, calculate UPS requirements around the complete PoE load. The fanless design helps with noise, but the published environmental limits still require an appropriate indoor equipment location.

When asking for a quotation, provide endpoint quantity, maximum PoE demand, VLAN or segmentation expectations, FortiGate model if present, and any transceiver requirements. This turns the procurement conversation from a simple model-price request into a configuration check, reducing the chance of receiving a switch without the supporting components needed for installation.

FortiSwitch FS-108F-FPOE Mbarara

Mbarara organizations with compact office, education, healthcare, hospitality or retail networks can evaluate the FS-108F-FPOE as a managed PoE access switch. Its value is strongest where the network needs a small number of wired connections but many of those connections also need power. Eight PoE+ capable Gigabit ports provide endpoint flexibility, and the 130 W shared budget should be treated as a core sizing specification.

A network refresh is a useful time to inventory devices. Count workstations, printers, phones, access points, cameras, access-control units and any specialized Ethernet equipment. Decide which devices need switch-supplied power and which use local power. Then reserve capacity for likely additions. This simple exercise reveals whether an eight-port model is appropriate or whether a 24-port access switch would provide a more sustainable growth path.

The FS-108F-FPOE can also fit a Fortinet-led design where the access layer is coordinated with firewall security. Segmentation and management should be planned before installation so ports are not configured ad hoc as devices are connected. If the site uses fiber uplinks, select transceivers against the physical fiber plant and upstream equipment. If it uses copper uplinks, include that port consumption in the eight-port plan.

Mbarara buyers should request the exact model and specify the deployment rather than asking generically for an eight-port FortiSwitch. The FPOE suffix matters because it identifies the full-PoE variant. Including the required quantity, endpoint schedule, uplink details and support context helps ensure that quotations are technically comparable.

FortiSwitch FS-108F-FPOE Gulu

For Gulu projects, the FS-108F-FPOE can serve as a small managed access layer for a branch, training site, clinic, shop or office that needs both Gigabit connectivity and PoE. A compact switch is useful when the network cabinet has limited space or when the deployment is focused on one zone rather than an entire building. The fanless design also avoids fan noise near occupied areas.

PoE planning should use worst-case endpoint requirements where practical. A switch can have enough physical PoE ports while still lacking sufficient shared wattage for a particular combination of devices. The 130 W budget therefore needs to be compared with the planned access points, phones, cameras or other powered equipment. Leaving power headroom can also make future changes easier.

The switch’s SFP interfaces can help when fiber is used between rooms or network distribution points. The project team should document the optical path before ordering SFPs, including distance, fiber type and upstream interface. Network segmentation should likewise be designed in advance, especially if the site carries administrative, guest, voice and surveillance traffic. Managed switching provides the tools, but good outcomes depend on a coherent VLAN and security design.

A Gulu procurement request should include the exact FS-108F-FPOE designation, quantity, endpoint list, PoE load, uplink medium and existing firewall or Fortinet environment. Buyers should also identify any rack, patching or power-protection needs so the quote can reflect the complete deployment rather than only the switch hardware.

FortiSwitch FS-108F-FPOE Kenya

Kenyan organizations can use the FS-108F-FPOE for small Fortinet access networks where all eight copper ports may need PoE capability. The model is suitable for branches, retail sites, small offices and edge zones that need to connect a controlled number of devices without moving to a higher port count. Two GE SFP interfaces support uplink flexibility, while the 130 W PoE budget defines the total available power for compatible endpoints.

The selection process should compare the 108F-FPOE with larger models based on actual device growth. An eight-port switch can be efficient for a stable small site, but it can become restrictive if the business expects more users, cameras or wireless access points. Buyers should include spare-port policy and future PoE demand in the sizing exercise. If an upstream link consumes a copper access port, that should also be reflected in the port plan.

Organizations operating multiple Kenyan branches can benefit from consistent configuration and documented deployment standards. That can include VLAN naming, port profiles, uplink design, firmware governance and monitoring practices. Standardization should not override site-specific requirements, however; larger locations may need different FortiSwitch models and PoE budgets.

For broader product-family context, visit FourTeck Fortinet Kenya, which covers FortiGate, FortiSwitch, FortiAP and related Fortinet solution areas. A quote request for the FS-108F-FPOE should specify quantity, endpoint power needs, SFP requirements and intended management environment.

FortiSwitch FS-108F-FPOE Kuwait

Kuwait buyers considering the FS-108F-FPOE should focus on its role as an indoor compact secure access switch. Eight Gigabit RJ45 ports with PoE+ and two GE SFP interfaces provide a useful combination for small offices, retail branches, hospitality zones and focused security or wireless deployments. The switch is fanless, but that does not remove the need for a properly conditioned and ventilated equipment location within Fortinet’s published operating range.

The PoE budget is central to design. A 130 W shared limit must support the combined requirements of all powered devices. Procurement teams should request endpoint model information from the wireless, voice or surveillance design and calculate the maximum expected load. If the total approaches the limit with no headroom, a higher-power or larger switch may be a better choice. Port count should be checked with the same discipline.

Fiber uplinks can be planned through the SFP interfaces when compatible transceivers are selected. The optics should match the fiber medium, distance and upstream device. For managed environments, document VLANs and the relationship with the firewall before commissioning. Organizations already using FortiGate can evaluate Fortinet’s integrated management model, but compatibility and software release planning should be validated for the deployed environment.

A Kuwait quotation request should identify the exact model, quantity, endpoint schedule, PoE requirements, optics, rack needs and support expectations. This level of detail helps suppliers quote the complete configuration and avoids ambiguity with other members of the FortiSwitch 108F family.

FortiSwitch FS-108F-FPOE Ghana

Ghanaian businesses can consider the FS-108F-FPOE for branch and edge networks that need a compact Fortinet-managed switching layer with PoE. The model’s eight Gigabit PoE+ access ports can support compatible phones, wireless access points, cameras and other powered devices, while the two GE SFP interfaces provide options for fiber uplinks. The shared 130 W power budget should be validated against the final endpoint mix.

A strong procurement process begins with the intended business service rather than the switch model. If the project is primarily a Wi-Fi rollout, count access points and their power needs, then add wired devices and uplink requirements. If it is a surveillance or voice project, calculate those endpoint loads separately. This helps determine whether the 108F-FPOE is a balanced choice or whether a larger FortiSwitch would offer better expansion capacity.

For multi-site businesses, a compact model can be standardized at smaller branches while larger locations use higher-density switches. Consistent management, VLAN policy and documentation can simplify operations across sites. Fiber optics, firmware and FortiGate integration should still be checked per deployment because physical links and software environments can vary.

Ghana buyers should include delivery destination, quantity, PoE endpoint details and uplink requirements in the request for quotation. Where the switch is part of a wider security project, include the FortiGate and wireless components so the architecture can be reviewed as one system rather than as separate purchases.

FortiSwitch FS-108F-FPOE Nigeria

Nigerian organizations planning compact branches can evaluate the FS-108F-FPOE where managed Gigabit access and PoE are required in the same small platform. Eight copper ports support PoE+ and share a 130 W budget, while two SFP interfaces can be used for compatible fiber uplinks. This combination can suit branch offices, retail locations, service centers, clinics and focused Wi-Fi or surveillance zones.

Power continuity should be considered as part of network availability. When one PoE switch powers access points, phones or cameras, the switch and its upstream connectivity become shared dependencies. UPS design should therefore reflect the switch plus endpoint load and the desired runtime. The installation location should also provide suitable ventilation and remain within the product’s operating conditions.

Network growth can change the economics of an eight-port platform. If the site is likely to add many endpoints, a larger FortiSwitch can reduce future cascading or replacement. If the branch has a stable small device count, the FS-108F-FPOE provides a compact way to keep PoE and managed switching together. The decision should be based on a documented port map and PoE worksheet rather than on current device count alone.

For Nigeria projects, specify the exact model, quantity, city, endpoint power requirements, SFP needs and existing Fortinet environment. When the switch will connect to a FortiGate, include the firewall model and intended management approach so compatibility and deployment assumptions can be reviewed during solution planning.

FortiSwitch FS-108F-FPOE Seychelles

Seychelles businesses in hospitality, professional services, retail and distributed office environments can consider the FS-108F-FPOE for compact PoE access. Eight Gigabit powered interfaces can support a small cluster of compatible access points, phones, cameras and other edge devices, while two GE SFP interfaces give designers fiber uplink options. The model is particularly relevant when a site needs managed switching but does not require a large port count.

Hospitality projects should map guest wireless, staff systems, voice, cameras and operational devices carefully. These services may need separate VLANs and firewall policies even when they share the same physical access switch. A Fortinet-centered design can coordinate switching with the broader security environment, but segmentation and management should be documented before commissioning.

The 130 W PoE budget should be compared with the maximum requirements of every powered endpoint. Wireless projects can change over time as access points are upgraded, so leaving reasonable power and port headroom can make future refreshes easier. Fiber links should be specified with the correct transceiver type for the installed medium and distance. Environmental and protected-power planning are also important because network equipment may support guest-facing and operational services simultaneously.

A Seychelles RFQ should state quantity, site type, endpoint schedule, PoE load, uplink medium, management environment and any rack or UPS requirements. This allows the solution to be reviewed as an operating network rather than a standalone product purchase and helps identify accessories that might otherwise be missed.

Fortinet Integration and Related Planning

The FS-108F-FPOE is most useful when the access layer is planned together with security, wireless and endpoint requirements. In a Fortinet architecture, a FortiGate can form the security foundation while FortiSwitch provides wired access and FortiAP provides wireless access. Buyers planning a wider security refresh can review the Fortinet products Tanzania visual reference for product-family context; image assets should not replace current vendor specifications or model validation.

For cross-region requirements, FortiSwitch FS-124F-POE Africa is a useful comparison point when a project needs more access ports and higher-speed uplink options than the compact 108F family. It is not a drop-in equivalent; the correct model depends on port density, PoE demand, uplink design and management requirements.

Quotation Checklist for FS-108F-FPOE

Frequently Asked Questions

Decision Recap

Choose the FS-108F-FPOE when the project genuinely fits a compact eight-port access layer, needs PoE+ flexibility across every copper port and can remain within the 130 W shared PoE budget. Confirm uplink optics, endpoint power, management architecture, installation environment and future growth before ordering. For projects that need substantially more access ports, higher-speed uplinks or a larger PoE envelope, compare another FortiSwitch model rather than overextending the compact 108F platform.

Consult FourTeck Tanzania

Share your endpoint count, PoE device models, uplink design, FortiGate environment and project destination. FourTeck can use that information to review the requested FS-108F-FPOE configuration and prepare a quotation discussion around the actual network requirement. Product availability, commercial terms and delivery details should be confirmed at the time of quotation rather than assumed from a web page.